Used tires to modular strips, a process and industry

Invention Suggestion:

Used Tires to Modular Strips 05 16 2010

Modular with Revulcanized Used Tire Flat Strips with Orientated Holes

Background: I have made many workbenches and the process is always the same. Cutting the board, cleaning the surface and drilling orientated holes for fixing the boards together with threaded rods.

In this country and the world for that matter there is a large problem what to do with waste tires. What we need to do with them is make modular flat strip for use in general construction. The strips would have orientated holes for construction. And a revulcanized surface that covers the wires threads, the revulcanizing rubber coming from the sidewalls or lathe scrapings.

The industrial process to produce them works like this. The waste tires are placed on an outward articulated spindle, much like how the eye of a camera works. They are quickly expanded to round form via the outward articulated spindle on the lathe. They are then turned on said lathe to remove surface tread. Waste trimmings are then heated to just above melting point in an industrial melting pot.

The tires are cut at the inner circumference on the same lathe. The remaining cone formation of the tire is then cut once at a right angle to form a basis rectangular strip. The remaining roundness of form would be “ironed” out as they are fed through a rolling heating press.

The melted trimmings are then applied to the surface of the treads as they are fed through the same press or one more discreetly designed for them.

These would form the basis modular forms. The width of said forms set at circumference cutting.

The strips would then be drilled with orientated holes much like the strips that form my work benches. They would be orientated much as some of today’s waste lumber are sorted and used to form laminates

And strips could indeed be made to form work benches in the same process I described above. A new type of rubber glue that is non-aromatic could be developed to make for healthy construction projects.

The strips could be used in Gym floors across the country to protect from metal and concrete fatigue, due to the percussive force of weights. Properly installed and laminated they would make industrial flooring that would allow very little leaching of oils and toxins into the soil below. (Toxins used in manufacturing is another issue I hope to address in a separate blog) Environmental remediation under factories is one of the biggest factors or costs in buying vacant factory property for use or redevelopment. In college I went to a Water Stock Conference, Some factories have so much leached chemical into the soil below that if you lit a match they would explode.

New vulcanizing putty spreaders much like used in drywall sanding surfacing could be developed to finish constructions made of said modular rubber strips.

God Bless Those Who Think

Thomas Paul Murphy

Copyright 2010 Thomas Paul Murphy

Magnetovoltaic Cell 05 16 2010

Invention Suggestion:

Magnetovoltaic Cell 05 16 2010

Just about every electronic device in your house produces a stray magnetic field. It is wasted energy. Every electric motor produces one; fluorescent lights do as do regular light bulbs. When I was a boy I had a pen radio. It came from the Johnson Smith catalog or The Reverend Fun Moon Shop on Wisconsin Av. in Milwaukee. Per my recollection it needed absolutely no battery what so ever to work. This is how powerful radio waves are. And they are of magnetic wave form.

Why not invent a magnetic voltaic cell or sheeting that captures them and converts them back to electricity. They could be incorporated into the device that produces said magnetic field to make it more electrically efficient. They could be added as a layer underneath solar cell panels for the capture and reproduction to electricity of a secondary energy form. This is probably what Tesla was all about. His materials were all said to be seized by the United States Government.

Silicon circuits with floating and fixed magnetically influenced particles that capture energy from a waste magnetic field and convert it to electricity. In effect radio waves are airborne electricity. The universe is said to radiate microwave energy originating from the time of the big bang.
For a basis for this technology think of Mexican jumping beans positioned along the line of a silicon circuit. As they are influenced by the magnetic field instead of using energy they produce it. The opposite of a computer chip.
If we can capture light we can capture these other fields also.
Motors could be wrapped in a layer of this energy conserving field, the energy of which fed back into the motor.
Is there an issue that would make this technology more or less efficient such as harmonic resonance?
There should be government grants made available for development of this. Barrack Obama would be the president to take the initiative to form the grants. This technology would also make Photovoltaic Cells more efficient.

Once again a separate under layer array of this in a solar cell farm would increase energy production.

A great benefit of this technology is that there would be less interference in the airwaves and cell phones and radios would need to use less energy to work. Father Sony you took us in the wrong direction.

God Bless Those Who Think

Thomas Paul Murphy

Copyright 2010 Thomas Paul Murphy

Invention Suggestion: Particle Wave Gasoline Diffused engine

Invention Suggestion: Particle Wave Gasoline Diffused engine 05 15 2010

Today gasoline is mixed with air to diffuse the gasoline molecules, in effect spreading the gasoline out thinner in the three dimensional space of the cylinder chamber. What we need to do is to use air and another technology, such as a hypothetical ion stream or similar particle wave form that could spread the gas out further in the three dimensional space of the cylinder. This technology has to be developed to the point that only one drop of gas is required to fire a cylinder once. If you have ever spilled just one drop of gasoline you will know from the aromatics that there is a lot more energy in it than is utilized, energy that can be extracted more efficiently and environmentally friendly.

The basis of today’s automotive engine could be redesigned with lighter and more efficient components materials, that would reduce friction, whereby it produces the same amount of force as a conventional engine and can do the same amount of work but is exponentially more efficient. Valves would be designed to be more captive, cylinders and valves made tight fitting and more captive of the energy release and conversion.

A while back I sent out a letter to about how automotive makers need to do a mass study on the weight to gas mileage ratio of all the automobiles that were ever made. I did this after seeing a public television program showing an early version black and video tape of a jeep that went over all kinds of terrain and got 40 mpg.

Where did we lose this jeep? Do we have to wait for NASA to find it?

God bless those who think

Thomas Paul Murphy

Copyright 2010 Thomas Paul Murphy