Inventions Needed : Marine inline fuel filter that is made strongly of metal and wont pull apart 12 14 2017

Inventions Needed : Marine inline fuel filter that is made strongly of metal and wont pull apart 12 14 2017

To be mounted inline just off the portable gas tank hose.
It would have to also be high flow model with no increase in fuel pump pressure required.
It would save intricate and costly replacement of fuel filter located in the outboard.
I would think a standard clam shell type metal fabricated seam would not be strong enough and eventually wobble/weasel apart.
So this would have to be perhaps a screw on cap to it that has one or more orings and a set screw, it would also have to be tamper resistant.  And could or could not incorporate replaceable internal filter elements.  Also it should not be so awkward that it causes separation of gas line from tank.

You know come to think of it all marine tanks should likely be made with this feature incorporated into the top of the plastic shell of them.  Whereby there are mounting brackets and a fuel filter that is safely housed in all means as mentioned above.

© 2017 Thomas Murphy

One final note, I think that a marine gas can should be made so that a 300 pound man could stand on it.  And it should have a flat top with an inset handle.

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

This would be a trolling motor that would mount to the back of your transom to one side.  The housing of it would not be able to turn.  However the motor could be lowered or raised to allow better use and efficiency of your Gas outboard or Inboard Outboard.

So how would you turn with an electric that is in a fixed position left and right?  Turning would be handled by water channeling through to the propellor.  There would be a dampener on each front side of a cylinder that encapsulates the electric motor head.  When both both dampeners are open the electric travels straight.  When the left dampener is open an underwater Bernoulli effect hydrodynamic would likely be created that channeled the water from the prop more to one side.  In effect a vacuum effect.water being drawn in from that side moves the boat in the direction the water is being drawn in from, exactly the same as how a thruster works.

The motor could be controlled by a wireless remote control held in the hand.  A dial would control left or right.  This type of motor would also serve as a secondary propulsion for shallow water travel such as up a shallow river.

© 2017 Thomas Paul Murphy

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

Inventions Needed: A Roll of Tape that bends to easily form letters for stencil painting over 12 01 2017

Inventions Needed: A Roll of Tape that bends to easily form letters for stencil painting over 12 01 2017

Not much I need to say about this.  You could use it to form B's, C's, D's R's S's.

Prime something white, wait for it to cure,  apply your tape lettering, paint a contrasting color over it, remove tape, and you have just labeled something.

Haven't seen anything on the market like it yet.  I won't get credit for it.  Instead credit will go to some disingenuous person of the "Burial Group."  (Burial Groups were the first Corporations in history?)  And the ubiquity of that is how God forsaken our country has become.


©  2017 Thomas Murphy
Originally published on 12 01 2017 at: www.inventionsneeded.blogspot.com