The Milwaukee and Wisconsin News: Good God how hard would it be? 01 19 2019

The Milwaukee and Wisconsin News: Good God how hard would it be? 01 19 2019: Good God how hard would it be? 01 19 2019 To make a life preserver coat that looks like a normal coat but is filled with high impact eva ...

Inventions Needed 11 12 2018 Pepper Spray that doubles as the back of a cell phone case

Inventions Needed 11 12 2018 Pepper Spray that doubles as the back of a cell phone case


© 2018 Thomas Murphy

Invention Needed A Casting Reel where the level wind system disengages after retrieve and folds out and away from the spool 11 02 2018

Invention Needed A Casting Reel where the level wind system disengages after retrieve and folds out and away from the spool 11 02 2018


Invention Needed A Casting Reel where the level wind system disengages after retrieve and folds out and away from the spool.

This would allow for an open spool free of the level wind system during the cast!  Granting longer casts because. 1.  There is no friction of the gears as they run the level wind system on cast.  2.  There is no interference with the line feeding out by the level wind eyelet.

Ocean surf casting reels operate without a level wind system at all.  However the user is required to manually spool the line during retrieve.  By using the hand that is holding the rod to guide the line in evenly on the spool.  That sounds completely arthritic to me!

But what if the level wind system did that for you and was hinged on the side opposite the retrieve handle?  Also the line would come out of the level wind eyelet as the hinge is moved out to the left for the casting position?

It would seem to me to be the best of both worlds.

The button that disengages the spool could also release the level wind bar from the side by the reel handle.  Spring loaded it would hinge to the left on a right handed reel and lock in place.  Perhaps the level wind eyelet would also separate at the top and move forward before the level wind bar swung to the left.  The rest of the cast is the same.

copyright 2018 Thomas Paul Murphy

Another way it could be accomplished is for the level wind eyelet to separate in two and retract down into the bar.  Thereby being below the level where the line feeds out on cast.

The level wind eyelet itself could fold downward and lock in place there upon cast.  Perhaps always being split on the top of it.

Invention Needed: Rivet on Feet 07 05 2018

Invention Needed:  Rivet on Feet 07 05 2018

Ever make something?  Perhaps a Desk Clock case or something that stands on a table or kitchen counter?

And you ask yourself, "How easy would it be if I could just drill a hole and rivet on a foot for it in two steps?

Rivet on "feet".  Would be just that.  You would use a rivet gun.

The feet could be made of rubber, Polyurethane or something with felt bonded to it.

Wouldn't that be great?

You could buy a bag of 50 of them from China (or America) for $3.00?

I don't see anything like that on the market today.

They could come in 1/8" and larger 1/4" rivet size.

I riveted a handle onto my metal garbage can with a 1/4" Rivet and it has lasted and looks like it will continue to last.  A spot weld didn't.

© 2018 Thomas Murphy

Inventions Needed: Black Holofil and a Belt Loop Flashlight 05 18 2018

Inventions Needed: Black Holofil and a Belt Loop Flashlight 05 18 2018

Black Holofil would likely be warmer!

A flashlight that you wear on your belt.  Makes use of it hands free.  Has two belt loops on the back of it.  Is made sturdy so it doesn't break.  Aluminum back frame.  Led Tech.

© 2018 Thomas Murphy

Inventions Needed: Fixed Barrel Handgun with non contiguous cylinder 03 07 2018

Inventions Needed:  Fixed Barrel Handgun with non contiguous cylinder 03 07 2018

In this type of gun the cylinder would not be a cylinder but rather more like a chain belt or linkage.  Whereby the cylinder could hold more cartridges.  But the main advantage being that 1. the barrel is fixed and therefore more accurate and 2.  that there is no loss of muzzle velocity through blowback recoil.

Indeed the chain cylinder could be fed from a standard magazine.  The cylinder could also perhaps just be three cartridges capacity and fed from the magazine.  A Four cylinder would seem to be the most ideal as the top cylinder bullet is firing the bottom cartridge is being loaded.

It amazes me why no one has ever perfected this before?

Upon firing a round and cylinder rotation the spend cartridge could be ejected in a downward directional manner.

The 3rd main advantage being that it has a higher capacity than a revolver.

There is also another 4th main advantage to it.

The 5th main advantage would be that this design would also make on of the best known army rifles there is!  For the above reasons.

So the search term to look for to see if it has been done before would be "cartridge fed revolver."

© 2018 Thomas Murphy

Looks like it has!  The design looks a little clumsy though.

https://www.google.com/search?q=cartridge+fed+revolver&ie=utf-8&oe=utf-8&client=firefox-b-1-ab

No, that isn't really a magazine fed revolver because it doesn't use standard cartridges and the revolver isn't a cylinder.  It is a cylinder with gapped sides.  So indeed no one has perfected this.

One would think that it would be a very simple problem to invent one with very few moving parts.  Would be a great project for an engineering contest.

I saw an old woman driving in  car today.  On the back of her car was a sticker or two that indicated she had three advanced engineering degrees.  I thought to myself, "There isn't anything that I couldn't design more intelligently than you and engineer better."  To me that statement just represents reality.  And is indeed supported by my lifetime experience.

A Slotted Ball/Cylinder Clevis for Fishing Lures 01 16 2018

A Slotted Ball/Cylinder Clevis for Fishing Lures 01 16 2018

This would be a clevis that is either a ball or a cylinder with a slot in it.  The spinning blade would fit into that slot which is affixed on the side of the ball cylinder.  And those two items would be fitted over and onto the wire shaft of the lure; the hole in the spinner blade aligned with to and over the wire shaft.

Also there could be more than one slot for the accommodation of more than one spinning blade.

Novel interpretations could include a collar that fits over the top to make the blades interchangeable by the user after completion.  Such that the hole in the blade fits over the top eyelet screw.

The ball/cylinder could be made from nylon or metal, or other materials with the appropriate material strength parameters.

There could be some slack in the slot in order to facilitate a rattle in conjuction with the blade spinning attraction.

And the downward angle of the slot could be chosen so that different degrees of spin are fixed.  Most likely 45 degrees.

The purpose of the invention is to assure that the spinner blade is always spinning during fishing retrieve.

The invention could also include an arm extending from the ball/cylinder with a secure clasp and over-mold to the tip of the spinner blade that has the "eyelet hole" in it.

Patent/ process to be applied for when funded.

© 2018 Thomas Paul Murphy

Inventions Needed : Marine inline fuel filter that is made strongly of metal and wont pull apart 12 14 2017

Inventions Needed : Marine inline fuel filter that is made strongly of metal and wont pull apart 12 14 2017

To be mounted inline just off the portable gas tank hose.
It would have to also be high flow model with no increase in fuel pump pressure required.
It would save intricate and costly replacement of fuel filter located in the outboard.
I would think a standard clam shell type metal fabricated seam would not be strong enough and eventually wobble/weasel apart.
So this would have to be perhaps a screw on cap to it that has one or more orings and a set screw, it would also have to be tamper resistant.  And could or could not incorporate replaceable internal filter elements.  Also it should not be so awkward that it causes separation of gas line from tank.

You know come to think of it all marine tanks should likely be made with this feature incorporated into the top of the plastic shell of them.  Whereby there are mounting brackets and a fuel filter that is safely housed in all means as mentioned above.

© 2017 Thomas Murphy

One final note, I think that a marine gas can should be made so that a 300 pound man could stand on it.  And it should have a flat top with an inset handle.

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

This would be a trolling motor that would mount to the back of your transom to one side.  The housing of it would not be able to turn.  However the motor could be lowered or raised to allow better use and efficiency of your Gas outboard or Inboard Outboard.

So how would you turn with an electric that is in a fixed position left and right?  Turning would be handled by water channeling through to the propellor.  There would be a dampener on each front side of a cylinder that encapsulates the electric motor head.  When both both dampeners are open the electric travels straight.  When the left dampener is open an underwater Bernoulli effect hydrodynamic would likely be created that channeled the water from the prop more to one side.  In effect a vacuum effect.water being drawn in from that side moves the boat in the direction the water is being drawn in from, exactly the same as how a thruster works.

The motor could be controlled by a wireless remote control held in the hand.  A dial would control left or right.  This type of motor would also serve as a secondary propulsion for shallow water travel such as up a shallow river.

© 2017 Thomas Paul Murphy

Inventions Needed: Novel Electric Trolling Motor 12 05 2017

Inventions Needed: A Roll of Tape that bends to easily form letters for stencil painting over 12 01 2017

Inventions Needed: A Roll of Tape that bends to easily form letters for stencil painting over 12 01 2017

Not much I need to say about this.  You could use it to form B's, C's, D's R's S's.

Prime something white, wait for it to cure,  apply your tape lettering, paint a contrasting color over it, remove tape, and you have just labeled something.

Haven't seen anything on the market like it yet.  I won't get credit for it.  Instead credit will go to some disingenuous person of the "Burial Group."  (Burial Groups were the first Corporations in history?)  And the ubiquity of that is how God forsaken our country has become.


©  2017 Thomas Murphy
Originally published on 12 01 2017 at: www.inventionsneeded.blogspot.com

Invention Needed: A DSLR aiming peep hole sight that attaches to the hot shoe of your DSLR Camera 11 22 2017

Invention Needed: A DSLR aiming peep hole sight that attaches to the hot shoe of your DSLR Camera 11 22 2017

This would allow you to take pictures of birds flying in the sky and not fall down while doing so.  Because you would not have to hold the camera up to your eye to aim, you could hold it away from your face and align the peep hole with the bird and push the shutter button.

The hot shoe of the camera is on top of the camera and can be used to attach accessories.  But I have never seen a remote aiming peep hole or rod hole on the top of one.

I would patent this if my mind was distraction free of voices and I was therefore able to.  I suppose you think I don't like money?  I suppose you think I don't believe one should strive to earn their way as an adult in life?  That is what you think of me?

© 2017 Thomas Paul Murphy

An OTF knife that sharpens the blade everytime it is deployed 09 26 2017

An OTF knife that sharpens the blade everytime it is deployed 09 26 2017

This could be achieved by having 4 ceramic plates mounted in angled channels in the front of the knife.  The channels they are mounted in configured so that the proper sharpening of the double edged blade would be achieved every time the blade is deployed.  The ceramic inserts would be spring loaded to ensure that there is pressure applied in order to sharpen the blade with the ceramic inserts.


© 2017 Thomas Murphy
Originally published on 09 26 2017 at: www.inventionsneeded.blogspot.com

Direct Injection Motorcycle 08 05 2017

Direct Injection Motorcycle 08 05 2017

I always heard the saying loud pipes save lives which is in favor of loud traditional motorcycles.  The Police used to ticket people who drove cars that had an exhaust leak and were very loud, they likely still do.

My outboard motor is a Direct Injection 25 horsepower and it is very fast.  It is also very quiet!!!  It weighs about 160 pounds.  I have to wonder how fast it would be in a motorcycle?

But one of the reasons I like it is because it is quiet.  I for the life of me don't understand how riding a motorcycle would be any different.  To get off of one of those things after it being that loud all day?  You have to have a certain degree of deafness.  Now tell me this, HOW IS OPERATING A MOTORCYCLE WITH A CERTAIN DEGREE OF DEAFNESS GOOD FOR YOUR LONGEVITY?  It doesn't make sense does it.  If you need the cars to hear you then you are not operating it defensively as you should.

The real reason you like it loud is because you like to cause trouble?  I have to wonder how many motorcycle riders were known to be that type of trouble in their lives?

Also ever go out to the country and someone has put a glass pack loud muffler system on their truck?  To me that is terrorizing the neighborhood.

Is a direct oil injection motorcycle even made?  It would be less polluting and more energy efficient.

You would have to compare motorcycle accidents on loud bikes versus motorcycle accidents on more quiet bikes.  I'll bet you a buck the quiet ones have fewer accidents.

******'

What if every small town in the United States had to have a breakfast house were everyone had to try a hand at working at at some point in their lives?  I think that would bring back what America is supposed to be.  This would have to occur is a post alcohol world though. 

Is a German American really even a German?  Are they really an American?

*****'

So does anyone make a direct injection motorcycle?

https://www.google.com/search?q=direct+injection+motorcycle&ie=utf-8&oe=utf-8

******'

How many car accidents do loud motorcycles cause?
How many shop accidents as the person working on the machine tool is distracted by the noise of one?
How many kids in school are distracted from learning when they hear one going through their neighborhood?  Do you want to know something?  There is nothing the mentally deficient like better than a distraction in a learning environment!

*****'
Main point?  How can you get off of a loud motorcycle after a day of riding and not have a pounding headache from the noise of it? Irritable when someone asks you something because you can't hear?

©  2017 Thomas Murphy

Generator and Alternator Technology 08 02 2017

Generator and Alternator Technology  08 02 2017

How much more efficient could a Generator or Alternator be if it was designed to reduce friction from air inside of the Gen/Alt?  That would mean smooth surfaces.  But it could also mean CREATING A VACUUM inside of the Gen/alt!  You would have no air friction what soever or heat from that if you created a vacuum inside of it.


© 2017 Thomas Murphy

Inventions Needed: Lawn Mower Improvements 07 09 2017

Inventions Needed: Lawn Mower Improvements 07 09 2017

A lawnmower should also have a secondary blower that propels the cut grass from out and under of the "Umbrellla" chamber of the mower.  This would allow the mower to maintain blade sharpness.  This would allow the motor to stay clean on the underside more readily.

So how would you engineer it?

It could be an offshoot gear off of the main drive.  But in any case you want to engineer that blower so that it doesn't require much force from the main power in order to be able to turn it.  Perhaps the it diverts no more than 5% away from the main blade.

Have they thought of this already?

It is needed for electric models in order to make them work better in the manner described above.

You really can't channel cut grass like it is in a C pump.  Could you create a second c type pump above the main cutting blade?  A c pump chamber above the main blade with an impeller inside to accomplish this?  Yes.  But would that take too much power away?  It would have to be engineered not to.  But I believe it could be made to provide enough assist to accomplish the above stated goals needing improvement.

© 2017 Thomas Murphy
Originally published at: WWW.inventionsneeded.blogspot.com

As always collect the money for the designs of American minds as if you thought of them yourself and have the products made in China.  You don't fool anyone.  What a bunch of rats you are.

Inventions Needed: Improved Handgun Design: internal collared ballast on the front of barrel 07 09 2017

Inventions Needed: Improved Handgun Design: internal collared ballast on the front of barrel 07 09 2017

The problem with handguns today is that the semiautomatics have a tilt barrel.  The barrel tilts upon firing.  There are fixed semi-autos available but they are usually heavier and prone to problems.

If you took a fixed barrel blowback gun and added a collared ballast to the front of the barrel....
essentially a slice of a cylinder with a hole in it... and mounted that to the front of the barrel...so that the gun is configured so that upon firing as the barrel is forced backward... pressure is created in that hollow cylinder behind the ballast that would serve as your recoil reducer, weight reducer and mechanism that ejects and cocks a new round.

Alternatively the collared ballast could be mounted at the rear of the barrel and ride in the "tube" of the slide.  So that the slide comes backward and pressure is created in the cylinder.

Either the collared ballast could have an o ring on it or metal spring rings.  The back of the slide would have a top vent port or more than one.  The decreased blowback allowing for more muzzle velocity and therefore a straighter shot.  The fixed in relative position of the barrel leading to straighter shots.

The gun would not need to weigh as much because weight would not be integral to the slide function in this type of blowback.

As always any defects to the gun design would have to be thought out before final production so that it wouldn't be something to be pulled off the shelves, recalled or have no interest in.

Today weight to slide is an integral part of how the mechanism works.  There is no reason why you can't have a barrel in a cylinder type arrangement as described above.  Gas systems have long been proven with the AR-15 and the AK-47.

There could indeed be more than one collared ballast mounted to the barrel either permanently or using a multi key approach.  Also barrel could be of different diameters so that the collared ballast or ballasts screw onto it at different places.  There being no gap between them on the length of the barrel because the collared ballasts could be flanged with a smaller diameter on one or both ends serving as a spacer.  There could even be one where it is screwed on and then a spring loaded key holds it into that position on the barrel.

Mounted to the front of the barrel you might have a stretching force of the barrel come into play?  That could be lessened with more than one collared ballast.  Some of which would be narrower.  Actually what I am describing could also be engineered to have an integral silencer in the barrel effect, via the gaps between the collared ballast.

It would seem to me that a manufacturer ought to be able to get the tolerances and mechanism of any gun right with regard to the range of powder charges commonly found in ammunition sold for them.  But that doesn't hold true into today's manufacturing market.  It would seem to me that you create the parameters you need to satisfy to make something and a capable and qualified engineer designer can solve every single one of them in one product with as few moving parts as possible.  But again that isn't the standard of the world we live in today.

© 2017 Thomas Murphy
Originally published on 07 09 2017 at: www.inventionsneeded.blogspot.com

Automotive Technology needed: An oil filter with a magnet around the outer circumfrence of it 04 02 2017

Automotive Technology needed: An oil filter with a magnet around the outer circumfrence of it 04 02 2017


This would allow the filter to be more efficient by trapping very fine particles!

© 2017 Thomas Murphy

originally published on 04 02 2017 at:

https://www.blogger.com/blogger.g?blogID=7427740867321380678#editor/target=post;postID=3412660272434415721

Auto Design Element Needed a Shelf for the Keys under the Ignition Switch 03 21 2017

Auto Design Element Needed a Shelf for the Keys under the Ignition Switch 03 21 2017

They need a shelf under the ignition switch to support the weight of the other keys on the keyring.  This would serve two purposes.

1.  Prevent the Ingition car key from breaking over time due to repeated metal fatigue from weight stress.
2.  Prevent the Ignition switch from needing to be replaced because it would not become as much warn over time.

Isn't it really simple?  How come they haven't figured that out in  over 100 years?  Because it is an Alcohol/retard economy.

© 2017 Thomas Murphy

Department of Defense Invention needed Fan Cooled Standard Issue Kevlar Helmet 03 17 2017

Department of Defense Invention needed Fan Cooled Standard Issue Kevlar Helmet 03 17 2017

Why on God's Green Earth have they not done this already?  A simple fan mounted to the exterior of the helmet, probably 1" x1"x 1/2"  with tubes going down under the edge of the helmet and distributing air from the top down inside the helmet?

With soldiers fighting in the heat of the Middle East why didn't they think of this?  Perhaps they did but I am not aware of it?

Ever hear the phrase "Cooler heads will prevail?"

Men think in those terms.  Women think in terms of how much money can I save or take in my braw strap. 

© 2017 Thomas Murphy

Originally published on 03 17 2017 at: www.inventionsneeded.blogspot.com

Invention Needed: A method to create a front gun sight for an AR-15 02 16 2016

Invention Needed: A method to create a front gun sight for an AR-15 02 16 2016

By taking a partial cross section of a spent .22LR cartridge shell, drilling a hole in it and placing it on the current sight post with pressure down fitting.  Thereby creating a front peep site.  A dab of kevlar epoxy on top to further hold it in place.

Alternative the top of the front site post can be down diameter-ed and or threaded and a nut placed on top to hold the peep in place.

Only to be made in case of a national emergency concerning homeland security???

© 2017 Thomas Murphy

Invention Process Needed: A method of coating a gun barrel 02 16 2017

Invention Process Needed: A method of coating a gun barrel 02 16 2017

Where by the barrel is coated via being placed in sacrificial jaws that are turned on it, as if held in a vice by them.  The sacrificial jaws are the coating material and made of zinc, magnesium, copper, aluminum, brass, or perhaps more expensive metals.

May have unique military applications/ effects.

The jaws can be heated.
Also there can be a fixative agent or process to the coating.

Inexpensive way to achieve a different effect.  That effect might be rustproofing or unique finish.

Copyright 2017 Thomas Murphy

Invention Needed: Leather Stitching Pliers 02 07 2017

Invention Needed: Leather Stitching Pliers 02 07 2017

A small but strong pair of needle nose pliers that has replaceable polyurethane jaws.  This allows one to use the pliers to pull a needle through  the leather without as much risk of the hard metal jaws of a regular pliers stressing and breaking the needle.

© 2017 Thomas Murphy

The Milwaukee and Wisconsin News: Humor 02 04 2017B

The Milwaukee and Wisconsin News: Humor 02 04 2017B: Man reading book "The Voyage of  the Cauldron Skipper"  in Mobile Angle Iron Hammock Copyright 2017 Thomas ...

The Milwaukee and Wisconsin News: Inventions Needed: Shallow Water Boat Trailer mod...

The Milwaukee and Wisconsin News: Inventions Needed: Shallow Water Boat Trailer mod...: Inventions Needed:  Shallow Water Boat Trailer modification 01 09 2017 This invention helps a boater launch his boat and retrieve it to t...

The Milwaukee and Wisconsin News: Inventions Needed: Semi Automatic Slide Based Hand...

The Milwaukee and Wisconsin News: Inventions Needed: Semi Automatic Slide Based Hand...: Inventions Needed: Semi Automatic Slide Based Handgun Improvements 12 23 2016 If I were engineering a new slide or OEM slide for these ty...

Hear No Evil Headphone Ear Muff Design 12 22 2016

Hear No Evil Headphone Ear Muff Design  12 22 2016

© 2016 Thomas Paul Murphy

What right does a Law Enforcment Officer have to use a Portable X Ray Imagaging system on your house? 12 18 2016

What right does a Law Enforcement Officer have to use a Portable X Ray Imagining system on your house?  12 18 2016

How is dosing a United States Citizen with cancer causing radiation not a violation of their Constitutional rights and a crime against humanity.

How is dosing a U.S. Citizen with cancer causing radiation in this manner not an "unreasonable search and seizure" illegal by the Supreme Law of the Land?

What do you think United States citizens are; some kind of rodents to exterminate?

I just happened to see that on a tv program called Forensics Files.

Copyright 2016 Thomas Paul Murphy
Originally published on 12 18 2016 at: www.themilwaukeeandwisconsinnews.blogspot.com
 

The Milwaukee and Wisconsin News: Invention Needed: Fogproof Eyeglasses 12 18 2016

The Milwaukee and Wisconsin News: Invention Needed: Fogproof Eyeglasses 12 18 2016: Invention Needed: Fogproof Eyeglasses 12 18 2016 If they can make a riflescope fogproof then they ought to be able to make eyeglasses fog...

The Milwaukee and Wisconsin News: Invention Needed:Rifle Barrel Stabilizer 12 07 201...

The Milwaukee and Wisconsin News: Invention Needed:Rifle Barrel Stabilizer 12 07 201...: Invention Needed:Rifle Barrel Stabilizer 12 07 2016 The handguard on an AR-15 is somewhat of a barrel stabilizer.  Why?  Because their is...

The Milwaukee and Wisconsin News: Invention Needed: Bubble Pen 12 07 2016

The Milwaukee and Wisconsin News: Invention Needed: Bubble Pen 12 07 2016: Invention Needed: Bubble Pen  12 07 2016 A common disposable type of pen whereby on the end opposite the writing end is a simple air valv...

The Milwaukee and Wisconsin News: Invention Needed: Bubble Pen 12 07 2016

The Milwaukee and Wisconsin News: Invention Needed: Bubble Pen 12 07 2016: Invention Needed: Bubble Pen  12 07 2016 A common disposable type of pen whereby on the end opposite the writing end is a simple air valv...

The Milwaukee and Wisconsin News: Inventions Needed Modular Additive Laptop Hard Dri...

The Milwaukee and Wisconsin News: Inventions Needed Modular Additive Laptop Hard Dri...: Inventions Needed Modular Additive Laptop Hard Drive  12 03 2016 Okay so they put 2 Terabytes of storage space on what is about the exact...

The Milwaukee and Wisconsin News: Inventions Needed: How come not a single pair of h...

The Milwaukee and Wisconsin News: Inventions Needed: How come not a single pair of h...: How come not a single pair of hearing protector muffs that I see are not made out of metal?05 12 2016 How much does it cost to make an a...

The Milwaukee and Wisconsin News: Inventions Needed A Vortex head pliers that always...

The Milwaukee and Wisconsin News: Inventions Needed A Vortex head pliers that always...: Inventions Needed A Vortex head pliers that always cuts wire so the end is straight and not sharp 05 01 2016 Copyright 2016 Thomas Paul ...

The Milwaukee and Wisconsin News: Invention Needed: A Three Prong Split Ring/ O-Ring...

The Milwaukee and Wisconsin News: Invention Needed: A Three Prong Split Ring/ O-Ring...: Invention Needed: A Three Prong Split Ring/ O-Ring Opener Expander 04 30 2016 It could be used to open up orings so that they can easily ...

Inventions Needed 03 20 2016

Inventions Needed 03 20 2016

1. A dust pan that has a tab on the back of it that sits level with the floor.  So that you can secure the dustpan with your foot while drawing dust back into it with the broom.  Good for those with back problems who don't want to stay in that position while sweeping into the dustpan.

2.  An easy interface back up camera system for cars with hitches for boat trailers.  Whereby when backing up the camera on the back of the boat trailer helps guide you and not the one at the back of the car.  Such an interface would work whereby there is another socket back by the trailer hitch on the car.  Plug in the trailer lights to one and the back up camera to this one.  Whereby once the plug is being used the back up camera viewing monitor automatically defaults to it.


Copyright 2016 Thomas Paul Murphy
Originally published on 03 20 2016 at: www.themilwaukeeandwisconsinnews.blogspot.com
 

The Milwaukee and Wisconsin News: Inventions Needed: Hollow Aluminum Handled Knife ...

The Milwaukee and Wisconsin News: Inventions Needed: Hollow Aluminum Handled Knife ...: Inventions Needed:  Hollow Aluminum Handled Knife that floats  02 19 2016 Wouldn't be too hard to make if you had the equipment.  Sam...

The Milwaukee and Wisconsin News: New AA battery invention needed: a battery that ha...

The Milwaukee and Wisconsin News: New AA battery invention needed: a battery that ha...: New AA battery invention needed: a battery that has a solar panel on its label you take it out and just place it in the sun 01 29 2016 Co...

The Milwaukee and Wisconsin News: Invention Design Needed: Telescoping Glove Compart...

The Milwaukee and Wisconsin News: Invention Design Needed: Telescoping Glove Compart...: Invention Design Needed: Telescoping Glove Compartment Door that extends to be a Pizza Tray upon opening01 09 2016 It could be created s...

The Milwaukee and Wisconsin News: Invention Needed: A battery operated handheld sona...

The Milwaukee and Wisconsin News: Invention Needed: A battery operated handheld sona...: Invention Needed: A battery operated handheld sonar imaging device to be used at apocalyptic check point gates 12 24 2015 In order to de...

The Milwaukee and Wisconsin News: Design elements/inventions needed 12 03 2015

The Milwaukee and Wisconsin News: Design elements/inventions needed 12 03 2015: Design elements/inventions needed 12 03 2015 It would seem to me that a boat trailer wheel should have a bearing integrated into the whee...

The Milwaukee and Wisconsin News: Design/Invention Elements Needed 12 04 2015

The Milwaukee and Wisconsin News: Design/Invention Elements Needed 12 04 2015: Design/Invention Elements Needed 12 04 2015 1.  All commercially available space heaters should have integrated smoke alarms and operatio...

The Milwaukee and Wisconsin News: Inventions Needed: A pipe/tubing cutter with a fi...

The Milwaukee and Wisconsin News: Inventions Needed: A pipe/tubing cutter with a fi...: Inventions Needed:  A pipe/tubing cutter with a fixed thin wood blade that cuts dowels perfectely, a green anchor rope and a transparent an...

The Milwaukee and Wisconsin News: Invention Design Needed to Market: Semi Circumfere...

The Milwaukee and Wisconsin News: Invention Design Needed to Market: Semi Circumfere...: Invention/Design Needed to Market: Semi Circumference Waist Belt 08 08 2015 This would be a heavy 1 1/4 inch piece of elastic waist band ...

The Milwaukee and Wisconsin News: What's wrong with the automobile 07 16 2015

The Milwaukee and Wisconsin News: What's wrong with the automobile 07 16 2015: What's wrong with the automobile 07 16 2015 Where your left foot rests there should be an extension well so that it can sit down in t...

The Milwaukee and Wisconsin News: Invention Novel Electronic Servo Motor 04 21 2015

The Milwaukee and Wisconsin News: Invention Novel Electronic Servo Motor 04 21 2015: Invention Novel Electronic Servo Motor 04 21 2015 This would be a motor whereby coils located biaxially to a ring of metal or magnetic ro...

The Milwaukee and Wisconsin News: Business Opportunity All inclusive and comprehens...

The Milwaukee and Wisconsin News: Business Opportunity All inclusive and comprehens...: Business Opportunity  All inclusive and comprehensive actual size depicting Fishing Hook Catalog 04 13 2015 A catalog like that would all...

The Milwaukee and Wisconsin News: AK-47 Design Improvement 04 10 2015

The Milwaukee and Wisconsin News: AK-47 Design Improvement 04 10 2015: AK-47 Design Improvement 04 10 2015 The sidewall of the lower bolt rails of an AK-47 should extend all the way to the base of the receive...

The Milwaukee and Wisconsin News: Gun Invention make a peep sight out of 1" scope ri...

The Milwaukee and Wisconsin News: Gun Invention make a peep sight out of 1" scope ri...: Gun Invention make a peep sight out of 1" scope rings and 1" diameter freeze plugs with a center hole drilled in them 03 26 2015 ...

The Milwaukee and Wisconsin News: How to Lose Weight Business/ Invention Idea 01 27 ...

The Milwaukee and Wisconsin News: How to Lose Weight Business/ Invention Idea 01 27 ...: How to Lose Weight Business/ Invention Idea 01 27 2015   I was reading the Book of Leviticus in the Bible. It states that you should cut...

The Milwaukee and Wisconsin News: Inventions Needed Binocular Design Improvement for...

The Milwaukee and Wisconsin News: Inventions Needed Binocular Design Improvement for...: Inventions Needed Binocular Design Improvement for Military and Civilian applications 01 02 2015 A spring activated or spring activated ...

The Milwaukee and Wisconsin News: Invention Needed Hill Descending Clothe Wings 12 2...

The Milwaukee and Wisconsin News: Invention Needed Hill Descending Clothe Wings 12 2...: Invention Needed Hill Descending Clothe Wings 12 29 2014 If you have ever been to the Lakefront in Milwaukee you will have noticed the pa...

The Milwaukee and Wisconsin News: Invention Needed A Watch that only tells me what d...

The Milwaukee and Wisconsin News: Invention Needed A Watch that only tells me what d...: Invention Needed A Watch that only tells me what day of the week it is and the month and date 12 29 2014 You can shove the time up your A...

The Milwaukee and Wisconsin News: Inventions Needed Celebration Fireworks that shoot...

The Milwaukee and Wisconsin News: Inventions Needed Celebration Fireworks that shoot...: Inventions Needed Celebration Fireworks that shoot from common guns!!!! 12 23 2014 I think that would be something great to have for the...

The Milwaukee and Wisconsin News: Automotive Design 12 18 2014 Inventions Needed

The Milwaukee and Wisconsin News: Automotive Design 12 18 2014 Inventions Needed: Automotive Design 12 18 2014 1. One added safety feature would be that if you got out of the seat with the car in drive it automatically ...

The Milwaukee and Wisconsin News: Invention Needed Composite Graphite Coated Copper ...

The Milwaukee and Wisconsin News: Invention Needed Composite Graphite Coated Copper ...: Invention Needed Composite Graphite Coated Copper Strand Automobile Battery Cable 12 10 2014 Of course it would have insulation over tha...

The Milwaukee and Wisconsin News: Invention needed single piece aluminum deer call 1...

The Milwaukee and Wisconsin News: Invention needed single piece aluminum deer call 1...: Invention needed single piece aluminum deer call 12 03 2014

The Milwaukee and Wisconsin News: Invention Needed Power Wheeled Snow blower with a ...

The Milwaukee and Wisconsin News: Invention Needed Power Wheeled Snow blower with a ...: Invention Needed Power Wheeled Snow blower with a Trailer moving accessory jack mount on the top!!!  11 26 2014 Okay local chicken head e...

The Milwaukee and Wisconsin News: Invention Needed Power Wheeled Snow blower with a ...

The Milwaukee and Wisconsin News: Invention Needed Power Wheeled Snow blower with a ...: Invention Needed Power Wheeled Snow blower with a Trailer moving accessory jack mount on the top!!!  11 26 2014 Okay local chicken head e...

The Milwaukee and Wisconsin News: Invention tools needed 09 30 2014

The Milwaukee and Wisconsin News: Invention tools needed 09 30 2014: Invention tools needed 09 30 2014 Shop press accessories that fit the standard diameter common shop press.  For example a hardened steel ...

The Milwaukee and Wisconsin News: Inventions Needed 08 22 2014

The Milwaukee and Wisconsin News: Inventions Needed 08 22 2014: Inventions Needed 08 22 2014 A vacuum cleaner where the suction is activated by a lever next to the end of the hose!  This would save on ...

The Milwaukee and Wisconsin News: Inventions Needed for treatment of disease 08 06 2...

The Milwaukee and Wisconsin News: Inventions Needed for treatment of disease 08 06 2...: Inventions Needed for treatment of disease 08 06 2014 A vibrating water/heavy liquid bath! When I read that as many as 1/3 of hu...

The Milwaukee and Wisconsin News: The Worm Gear C Clamp Inventions Needed 04 01 2014...

The Milwaukee and Wisconsin News: The Worm Gear C Clamp Inventions Needed 04 01 2014...: The Worm Gear C Clamp Inventions Needed 04 01 2014 This would essentially be just like a C Clamp accept instead of the turning handle bei...

The Milwaukee and Wisconsin News: The Unsinkable Boat 03 10 2014

The Milwaukee and Wisconsin News: The Unsinkable Boat 03 10 2014: The Unsinkable Boat 03 10 2014 Thomas Paul Murphy Originally published on 03 10 2014 at: www.themilwaukeeandwisconsinnews.blogsp...

The Milwaukee and Wisconsin News: If they manufactured Lithium AA Rechargeable Batte...

The Milwaukee and Wisconsin News: If they manufactured Lithium AA Rechargeable Batte...: If they manufactured Lithium AA Rechargeable Batteries You would never have to keep buying any of that other cr@p!

The Milwaukee and Wisconsin News: Inventions Needed With regard to the quiet lawn mo...

The Milwaukee and Wisconsin News: Inventions Needed With regard to the quiet lawn mo...: Inventions Needed With regard to the quiet lawn mower mentioned in this morning newspaper 03 01 2014 http://www.jsonline.com/bus...

The Milwaukee and Wisconsin News: Inventions Needed: A three layer rifle barrel 02 2...

The Milwaukee and Wisconsin News: Inventions Needed: A three layer rifle barrel 02 2...: Inventions Needed: A three layer rifle barrel Where the inner layer is your standard top grade metal for rifle barrels.

The Milwaukee and Wisconsin News: Inventions Needed: A three layer rifle barrel 02 2...

The Milwaukee and Wisconsin News: Inventions Needed: A three layer rifle barrel 02 2...: Inventions Needed: A three layer rifle barrel Where the inner layer is your standard top grade metal for rifle barrels.

The Milwaukee and Wisconsin News: Inventions Needed The indestructIble head phones! ...

The Milwaukee and Wisconsin News: Inventions Needed The indestructIble head phones! ...: Inventions Needed The indestructible head phones!  02 22 2014 They must also have a noise cancellation button.  You would be able to put ...

The Milwaukee and Wisconsin News: Inventions Needed 02 05 2014

The Milwaukee and Wisconsin News: Inventions Needed 02 05 2014: Inventions Needed 02 05 2014

The Milwaukee and Wisconsin News: Experiment of the day 02 04 2014

The Milwaukee and Wisconsin News: Experiment of the day 02 04 2014: Experiment of the day 02 04 2014 If I cut out two pieces

The Milwaukee and Wisconsin News: Two Inventions Needed 01 18 2014

The Milwaukee and Wisconsin News: Two Inventions Needed 01 18 2014: Two Inventions Needed 01 18 2014 1.  A basting brush that has a stainless spring wires as the brush part.  The wires would be a little le...

The Milwaukee and Wisconsin News: AK-47 Improvements 01 15 2014

The Milwaukee and Wisconsin News: AK-47 Improvements 01 15 2014: AK-47 Improvements 01 15 2014 This gun could be mass produced a lot faster if the dust cover also became the upper rail bolt guide!

The Milwaukee and Wisconsin News: Invention Needed Electricity Producing Window Blin...

The Milwaukee and Wisconsin News: Invention Needed Electricity Producing Window Blin...: Invention Needed Electricity Producing Window Blinds  01 06 2014 One of my best energy saving Invention Ideas Ever!!!!!!

The Milwaukee and Wisconsin News: How to Recycle Particle Board and Plastic Bottles ...

The Milwaukee and Wisconsin News: How to Recycle Particle Board and Plastic Bottles ...: How to Recycle Particle Board   12 30 2013 If someone were to make and sell strips of sheet metal in dimensions of 1 1/4 inches to 2.5 in...

The Milwaukee and Wisconsin News: Relevant Search Term 12 25 2013

The Milwaukee and Wisconsin News: Relevant Search Term 12 25 2013: Relevant Search Term 12 25 2013 "Indestructible Ear Buds" That is what I am looking for!  I believe there might be an opportu...

The Milwaukee and Wisconsin News: Inventions Needed New Funnel and Funneling Technol...

The Milwaukee and Wisconsin News: Inventions Needed New Funnel and Funneling Technol...: Inventions Needed New Funnel and Funneling Technology 12 18 2013 When pouring thicker viscosity liquids the simple funnel tends to clog b...

The Milwaukee and Wisconsin News: Inventions Needed 12 16 2013

The Milwaukee and Wisconsin News: Inventions Needed 12 16 2013: Inventions Needed 12 16 2013 If they can make a machine called a "giraffe" that climbs a tree and cuts the limbs off as it clim...

The Milwaukee and Wisconsin News: Inventions Needed Military Ammo boxes should be ma...

The Milwaukee and Wisconsin News: Inventions Needed Military Ammo boxes should be ma...: Inventions Needed Military Ammo boxes should be made out of Aluminum 12 15 2013 Aluminum cans are a ubiquity!  All that soda is in alumin...

The Milwaukee and Wisconsin News: Shotgun Shell to Hand Grenade Conversion Kit Inven...

The Milwaukee and Wisconsin News: Shotgun Shell to Hand Grenade Conversion Kit Inven...: Shotgun Shell to Hand Grenade Conversion Kit Inventions Needed 12 10 2013 Seems to me there ought to be an easy way to convert a shot gun...

The Milwaukee and Wisconsin News: Electric Guitar Design Improvement by Thomas Paul ...

The Milwaukee and Wisconsin News: Electric Guitar Design Improvement by Thomas Paul ...: Electric Guitar Design Improvement by Thomas Paul Murphy Construction of a laminate neck with a bridge and nut that also serve as a clamp...

Inventions Needed Boat trailer with second set of fold down wheels

Inventions Needed Boat trailer with second set of fold down wheels


These would be cocking axles that pivot a total of 90 degrees to cock into place.  One of them would indeed be considered a spare tire.

This would be a good system to have in place for moving a trailer over soft ground.  But also in case one of the bearings, which are prone to water damage, were to fail!

Another invention needed is a re thread kit for an AR-15 with a plastic "upper Receiver"  They should never be built with plastic threads!  At the very least there should be a brass thread collar formed into that upper receiver!  And I am one known to never strip threads!

Musky Watch by ThomasPaulMurphy
See additional Watches online at Zazzle



Thomas Paul Murphy

Originally published on 12 06 2013 at: www.themilwaukeeandwisconsinnews.blogspot.com

Copyright 2013 Thomas Paul Murphy

 

The Milwaukee and Wisconsin News: Inventions Needed Laptop Design Features 12 02 201...

The Milwaukee and Wisconsin News: Inventions Needed Laptop Design Features 12 02 201...: Inventions Needed Laptop Design Features Laptops should feature a port on them whereby a small set of headphones, meaning ear buds can be...

The Milwaukee and Wisconsin News: Inventions Needed 11 18 2013

The Milwaukee and Wisconsin News: Inventions Needed 11 18 2013: Inventions Needed 11 18 2013 A metal box that holds that holds one single box of shotgun shells in it. Why?  Because often when going h...

The Milwaukee and Wisconsin News: Business Opportunity Invention Needed 10 31 2013...

The Milwaukee and Wisconsin News: Business Opportunity Invention Needed 10 31 2013...: Business Opportunity Invention Needed   10 31 2013 Some women would do well with makeup designed specifically for the type of lighting th...

The Milwaukee and Wisconsin News: Inventions Needed Plywood with insulating layers 1...

The Milwaukee and Wisconsin News: Inventions Needed Plywood with insulating layers 1...: Inventions Needed Plywood with insulating layers 10 25 2013 This would be plywood, such that if it were five layer plywood layers 2 and 4...

The Milwaukee and Wisconsin News: Inventions Needed A Mop head that will hold a stan...

The Milwaukee and Wisconsin News: Inventions Needed A Mop head that will hold a stan...: Inventions Needed A Mop head that will hold a standard microfiber towel securely on a rectangular mopping plane 10 21 2013 Whereby you c...

The Milwaukee and Wisconsin News: Inventions Needed A Mop head that will hold a stan...

The Milwaukee and Wisconsin News: Inventions Needed A Mop head that will hold a stan...: Inventions Needed A Mop head that will hold a standard microfiber towel securely on a rectangular mopping plane 10 21 2013 Whereby you c...

The Milwaukee and Wisconsin News: Inventions Needed: Cord Belt and Broken Tape Measu...

The Milwaukee and Wisconsin News: Inventions Needed: Cord Belt and Broken Tape Measu...: Inventions Needed: Cord Belt and Broken Tape Measure Belt 10 21 2013 Some of us have slipped disks in our backs and thick and wide belts ...

The Milwaukee and Wisconsin News: Mandate Needed 10 19 2013

The Milwaukee and Wisconsin News: Mandate Needed 10 19 2013: Mandate Needed All fiberglass bat type insulation should have one side with   either foil or clothe like material.   Nylon is cheap ...

The Milwaukee and Wisconsin News: Two Inventions desperately needed 10 14 2013

The Milwaukee and Wisconsin News: Two Inventions desperately needed 10 14 2013: Two Inventions desperately needed 10 14 2013 1. Corn syrup produced from organically grown corn for mainstream sodas. 2. Led based fire...

The Milwaukee and Wisconsin News: Two Inventions needed not just to keep the evil mi...

The Milwaukee and Wisconsin News: Two Inventions needed not just to keep the evil mi...: Two Inventions needed not just to keep the evil minds of the specialty chemical industry busy 10 02 2013 1.  A conductive wire glue that ...

The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013 Update # 2

The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013 Update # 2: Cost of Ridiculousness 07 03 2013 I go into a national discount store looking for waterproof containers that will hold a cell phone.   I ...

The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013

The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013: Cost of Ridiculousness 07 03 2013 I go into a national discount store looking for waterproof containers that will hold a cell phone.   I ...

The Milwaukee and Wisconsin News: Inventions Needed White Sacks to hold a gallon of ...

The Milwaukee and Wisconsin News: Inventions Needed White Sacks to hold a gallon of ...: Inventions Needed White Sacks to hold a gallon of water in a plastic bottle in 06 20 2013 Purpose:  So that sunlight cannot penetrate th...

The Milwaukee and Wisconsin News: Two Inventions Needed 06 17 2013

The Milwaukee and Wisconsin News: Two Inventions Needed 06 17 2013: 1.  The publicly available hand crank bicycle pump to be located 10 feet from all public drinking fountains, (Bubblers.)  This would be one...

The Milwaukee and Wisconsin News: Inventions Needed A Bicycle that turns into a Law...

The Milwaukee and Wisconsin News: Inventions Needed A Bicycle that turns into a Law...: Inventions Needed  A Bicycle that turns into a Lawn Chair 06 11 2013 Copyright 2013 Thomas Paul Murphy Originally published on 06 11 201...

The Milwaukee and Wisconsin News: Inventions Needed: The Hydraulically Shaped Float ...

The Milwaukee and Wisconsin News: Inventions Needed: The Hydraulically Shaped Float ...: Inventions Needed: The Hydraulically Shaped Float Bearing The Hydraulically Shaped Float Bearing There is a problem that arises wh...

The Milwaukee and Wisconsin News: Inventions Needed Electric Car Theory 06 02 2013

The Milwaukee and Wisconsin News: Inventions Needed Electric Car Theory 06 02 2013: Inventions Needed Electric Car Theory 06 02 2013 Theoretically if you had a very light weight car you could increase the mileage per unit...

The Milwaukee and Wisconsin News: Inventions Needed 05 02 2013

The Milwaukee and Wisconsin News: Inventions Needed 05 02 2013: Inventions Needed 05 02 2013 Ground Scanning and Spike Inserter (GSSI) This would be a device about the same size as a Jack Hammer.  It...