The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013

The Milwaukee and Wisconsin News: Cost of Ridiculousness 07 03 2013: Cost of Ridiculousness 07 03 2013 I go into a national discount store looking for waterproof containers that will hold a cell phone.   I ...

The Milwaukee and Wisconsin News: Inventions Needed White Sacks to hold a gallon of ...

The Milwaukee and Wisconsin News: Inventions Needed White Sacks to hold a gallon of ...: Inventions Needed White Sacks to hold a gallon of water in a plastic bottle in 06 20 2013 Purpose:  So that sunlight cannot penetrate th...

The Milwaukee and Wisconsin News: Two Inventions Needed 06 17 2013

The Milwaukee and Wisconsin News: Two Inventions Needed 06 17 2013: 1.  The publicly available hand crank bicycle pump to be located 10 feet from all public drinking fountains, (Bubblers.)  This would be one...

The Milwaukee and Wisconsin News: Inventions Needed A Bicycle that turns into a Law...

The Milwaukee and Wisconsin News: Inventions Needed A Bicycle that turns into a Law...: Inventions Needed  A Bicycle that turns into a Lawn Chair 06 11 2013 Copyright 2013 Thomas Paul Murphy Originally published on 06 11 201...

The Milwaukee and Wisconsin News: Inventions Needed: The Hydraulically Shaped Float ...

The Milwaukee and Wisconsin News: Inventions Needed: The Hydraulically Shaped Float ...: Inventions Needed: The Hydraulically Shaped Float Bearing The Hydraulically Shaped Float Bearing There is a problem that arises wh...

The Milwaukee and Wisconsin News: Inventions Needed Electric Car Theory 06 02 2013

The Milwaukee and Wisconsin News: Inventions Needed Electric Car Theory 06 02 2013: Inventions Needed Electric Car Theory 06 02 2013 Theoretically if you had a very light weight car you could increase the mileage per unit...

The Milwaukee and Wisconsin News: Inventions Needed 05 02 2013

The Milwaukee and Wisconsin News: Inventions Needed 05 02 2013: Inventions Needed 05 02 2013 Ground Scanning and Spike Inserter (GSSI) This would be a device about the same size as a Jack Hammer.  It...

The Milwaukee and Wisconsin News: Inventions Needed 04 23 2013

The Milwaukee and Wisconsin News: Inventions Needed 04 23 2013: Inventions Needed 04 23 2013 A tall kitchen garbage can that sucks the air out the bottom when installing a new plastic can liner so that...

The Milwaukee and Wisconsin News: Business Opportunity for Local Manufacturer 04 16 ...

The Milwaukee and Wisconsin News: Business Opportunity for Local Manufacturer 04 16 ...: Business Opportunity for Local Manufacturer 04 16 2013 One way to address the issue of waste water that the deep tunnel holds being washe...

The Milwaukee and Wisconsin News: Inventions Needed 04 07 2013 GPS and Backup Monito...

The Milwaukee and Wisconsin News: Inventions Needed 04 07 2013 GPS and Backup Monito...: Inventions Needed 04 07 2013 GPS and Backup Monitor in one An aftermarket automobile GPS with a backup monitor in one. Background:...

The Milwaukee and Wisconsin News: Inventions Needed 03 23 2013

The Milwaukee and Wisconsin News: Inventions Needed 03 23 2013: Inventions Needed 03 23 2013 1.          A C-Clamp that has one end of the turning pin weighted so that one can use one hand to spin...

The Milwaukee and Wisconsin News: Inventions Needed ~02 28 2013 Fish Paint

The Milwaukee and Wisconsin News: Inventions Needed ~02 28 2013 Fish Paint: Inventions Needed 02 28 2013 Fish Paint A paint that flakes off like a fish scales rather than cracking and peeling.   As it is spray...

The Milwaukee and Wisconsin News: Inventions Needed B 02 28 2013

The Milwaukee and Wisconsin News: Inventions Needed B 02 28 2013: Inventions Needed B 02 28 2013 Why on earth can't they line a galvanized metal garbage can with a layer of plastic like a plastic...

The Milwaukee and Wisconsin News: Inventions Needed 03 13 2013

The Milwaukee and Wisconsin News: Inventions Needed 03 13 2013: Inventions Needed 03 13 2013 Medieval Axe Heads that accept a standard 3/4" U.S. threaded plumbing pipe. Needs to be durable like ...

Should all patents represented filed by any patent lawyer who is disbarred

Should all patents represented filed by any patent lawyer who is disbarred be invalidated?

Yes!

And if that lawyer represented a University all of those patents should be disbarred and any proceeds from them to be transferred to the government to give the poor more food stamps for food only.

Bottom line, you cheated the American economy and you know it!

Copyright 2013 Thomas Paul Murphy
Originally published on 03 13 2013 at: www.inventionsneeded.blogspot.com

The Milwaukee and Wisconsin News: Two Inventions Needed 03 13 2013

The Milwaukee and Wisconsin News: Two Inventions Needed 03 13 2013: 1. Camera flip top polarizing filter.  Background.  Many rifle scopes have covers that flip up and out of the way of the lens.  These cove...

The Milwaukee and Wisconsin News: They Point Regarding Electric Cars is that they co...

The Milwaukee and Wisconsin News: They Point Regarding Electric Cars is that they co...: They Point Regarding Electric Cars is that they could be made to do well! The current models might not be doing well but that is only bec...

The Milwaukee and Wisconsin News: INVENTIONS NEEDED POST HOT WATER HEATER FILTER 03 ...

The Milwaukee and Wisconsin News: INVENTIONS NEEDED POST HOT WATER HEATER FILTER 03 ...: INVENTIONS NEEDED POST HOT WATER HEATER FILTER 03 07 2013 Background:  What most Americans do not know is that water coming from their h...

The Milwaukee and Wisconsin News: Inventions Needed 03 02 2013 Light for Watch Band

The Milwaukee and Wisconsin News: Inventions Needed 03 02 2013 Light for Watch Band: Inventions Needed 03 02 2013 Light for Watch Band This is a small light that would slip onto your watch band.  It would be able to latera...

The Milwaukee and Wisconsin News: Inventions Needed 02 28 2013 Fish Paint

The Milwaukee and Wisconsin News: Inventions Needed 02 28 2013 Fish Paint: Inventions Needed 02 28 2013 Fish Paint A paint that flakes off like a fish scales rather than cracking and peeling. As it is sprayed o...

The Milwaukee and Wisconsin News: Inventions Needed 02 23 2013

The Milwaukee and Wisconsin News: Inventions Needed 02 23 2013: Inventions Needed 02 23 2013 Large frozen waffles the size of pies and slim line low profile toasters to go with them. Background: Th...

The Milwaukee and Wisconsin News: Next Generation Military Assault Rifle Successor t...

The Milwaukee and Wisconsin News: Next Generation Military Assault Rifle Successor t...: Next Generation Military Assault Rifle Successor to the AR-15   02 21 2013 The next generation military rifle will be able to fire rapidl...

The Milwaukee and Wisconsin News: Invention Needed 02 12 2013

The Milwaukee and Wisconsin News: Invention Needed 02 12 2013: Invention Needed 02 12 2013 Solar Powered Digital Thermostat If they can make a watch that works this way then they can make a thermome...

The Milwaukee and Wisconsin News: Inventions Needed 02 11 2013

The Milwaukee and Wisconsin News: Inventions Needed 02 11 2013: Inventions Needed 02 11 2013 1. Aluminum or other powdered caulk that spreads like jelly and dries hard. 2. A gas cylinder charged mech...

The Milwaukee and Wisconsin News: Inventions Needed Swimmers Nose Valve 01 10 2013

The Milwaukee and Wisconsin News: Inventions Needed Swimmers Nose Valve 01 10 2013: Inventions Needed Swimmers Nose Valve 01 10 2013 Background: When one uses a snorkel and a goggles what one really needs is a valve that ...

The Milwaukee and Wisconsin News: Invention Needed A system to bill unwanted callers...

The Milwaukee and Wisconsin News: Invention Needed A system to bill unwanted callers...: Invention Needed A system to bill unwanted callers by the minute 01 03 2012 Part 1 of a 2 part concept. When somebody calls me on the p...

The Milwaukee and Wisconsin News: Inventions Needed Ski's for Little Dogs 01 03 20...

The Milwaukee and Wisconsin News: Inventions Needed Ski's for Little Dogs 01 03 20...: Inventions Needed Ski's for Little Dogs   01 03 2013 This one is on the lighter side. Background:  There is a great market for people w...

The Milwaukee and Wisconsin News: Inventions Needed: Dry Antibiotic type powder that...

The Milwaukee and Wisconsin News: Inventions Needed: Dry Antibiotic type powder that...: Inventions Needed: Dry Antibiotic type powder that can be kept in your wallet 12 27 2012 I thought of this one while I removed and cleane...

The Milwaukee and Wisconsin News: Inventions Needed Solar Electric Furnace 12 20 201...

The Milwaukee and Wisconsin News: Inventions Needed Solar Electric Furnace 12 20 201...: Inventions Needed Solar Electric Furnace 12 20 2012 So how does one design a furnace to heat their home in the winter using the powe...

The Milwaukee and Wisconsin News: Inventions Needed A Simple process to Liquify Drie...

The Milwaukee and Wisconsin News: Inventions Needed A Simple process to Liquify Drie...: Inventions Needed A Simple process to Liquify Dried and Powdered Egg Shell Calicum to serve as a dieatary source of measured calcium 12 16 ...

The Milwaukee and Wisconsin News: Inventions Needed: Middle Angled Open Eyelet Leath...

The Milwaukee and Wisconsin News: Inventions Needed: Middle Angled Open Eyelet Leath...: Inventions Needed: Middle Angled Open Eyelet Leather Sewing Drill Pins Background:   Many would like to make items out of leather ...

The Milwaukee and Wisconsin News: KEVLAR EPOXY was the best product to come to the m...

The Milwaukee and Wisconsin News: KEVLAR EPOXY was the best product to come to the m...: KEVLAR EPOXY was the best product to come to the market what happened to it? One could fix virtually anything with it!!!! What happened...

The Milwaukee and Wisconsin News: Inventions Needed Solar Powered Engine block heate...

The Milwaukee and Wisconsin News: Inventions Needed Solar Powered Engine block heate...: Inventions Needed Solar Powered Engine block heater for two car garage 11 26 2012 How nice would it be to unplug your car from the solar...

The Milwaukee and Wisconsin News: Inventions Needed Backpack feed for AR 15

The Milwaukee and Wisconsin News: Inventions Needed Backpack feed for AR 15: Inventions Needed Backpack feed for AR 15 What a well equipped solder in a modern war zone needs is a feed into his machine gun rifl...

The Milwaukee and Wisconsin News: Inventions Needed 10 10 2012 Trimmer with 4" cutti...

The Milwaukee and Wisconsin News: Inventions Needed 10 10 2012 Trimmer with 4" cutti...: Inventions Needed 10 10 2012 Trimmer with 4" cutting surface A hair trimmer with the mechanism of a nose trimmer but with a 4” cut...

The Milwaukee and Wisconsin News: Inventions Needed Mag Wave Technology used to defl...

The Milwaukee and Wisconsin News: Inventions Needed Mag Wave Technology used to defl...: Inventions Needed Mag Wave Technology used to deflect steel metal Russian Bullets 10 02 2012 © 2012 Thomas Paul Murphy If you ...

The Milwaukee and Wisconsin News: Common Wealth 10 01 2012

The Milwaukee and Wisconsin News: Common Wealth 10 01 2012: Common Wealth 10 01 2012 There is a whole lot of meaning in those two words with regard to intent and the life’s history of those ...

The Milwaukee and Wisconsin News: Inventions Needed A Shotgun that Shoots Arrows 09 ...

The Milwaukee and Wisconsin News: Inventions Needed A Shotgun that Shoots Arrows 09 ...: Inventions Needed A Shotgun that Shoots Arrows 09 26 2012 It would be pneumatically based.  And the back of the arrow might have a wad th...

The Milwaukee and Wisconsin News: Inventions Needed 09 18 2012

The Milwaukee and Wisconsin News: Inventions Needed 09 18 2012: Inventions Needed 09 18 2012 1.          A turkey call that attaches to the stalk of your gun or to the frame of your bow.   This wo...

The Milwaukee and Wisconsin News: Inventions Needed 09 18 2012

The Milwaukee and Wisconsin News: Inventions Needed 09 18 2012: Inventions Needed 09 18 2012 1.          A turkey call that attaches to the stalk of your gun or to the frame of your bow.   This wo...

The Milwaukee and Wisconsin News: Inventions Needed: Automated ticketing system for...

The Milwaukee and Wisconsin News: Inventions Needed: Automated ticketing system for...: Inventions Needed:  Automated ticketing system for tailgaters 09 13 2012 Too often when we are driving on the highway or city there are t...

The Milwaukee and Wisconsin News: Inventions Needed 09 13 2012

The Milwaukee and Wisconsin News: Inventions Needed 09 13 2012: Inventions Needed 09 13 2012 : Fixed bladed knifes with Aircraft aluminum base metal insert and woven bound cast to a high carbon stainless...

The Milwaukee and Wisconsin News: Inventions Needed: A Kiosk CD Printer 09 12 2012

The Milwaukee and Wisconsin News: Inventions Needed: A Kiosk CD Printer 09 12 2012: Inventions Needed: A Kiosk CD Printer A company like Coinstar needs to partner with a music industry partner like CD Baby. What ...

The Milwaukee and Wisconsin News: Two Inventions Needed 09 07 2012

The Milwaukee and Wisconsin News: Two Inventions Needed 09 07 2012: Two Inventions Needed 09 07 2012 1.        Invention Needed: A Trumpet with the same sound as a regular Trumpet but takes less lun...

The Milwaukee and Wisconsin News: Inventions Needed A hand dryer for public bathroom...

The Milwaukee and Wisconsin News: Inventions Needed A hand dryer for public bathroom...: Inventions Needed A hand dryer for public bathrooms that uses a random direction of air flow to dry your hands 08 28 2012 The problem wit...

The Milwaukee and Wisconsin News: The Stapled up SIKH 08 22 2012

The Milwaukee and Wisconsin News: The Stapled up SIKH 08 22 2012: The Stapled up SIKH As I looked at the chest of the SIKH who was shot by Wade Page… I just have to ask myself, “Is that indeed modern...

The Milwaukee and Wisconsin News: Inventions Needed Pressure Wood Treater in a Can

The Milwaukee and Wisconsin News: Inventions Needed Pressure Wood Treater in a Can: Inventions Needed Pressure Wood Treater in a Can How many of us like to make outdoor furniture but do not like to cut the green lumber. ...

The Milwaukee and Wisconsin News: Inventions Needed Shin guards for the shop worker

The Milwaukee and Wisconsin News: Inventions Needed Shin guards for the shop worker: Inventions Needed Shin guards for the shop worker How many of like to work in the shop but as we are constantly moving about we find ours...

The Milwaukee and Wisconsin News: Inventions Needed Pivoting holster you can fire th...

The Milwaukee and Wisconsin News: Inventions Needed Pivoting holster you can fire th...: Inventions Needed Pivoting holster you can fire through. We need a holster that pivots on a ball or bearing so that you can point it at a...

The Milwaukee and Wisconsin News: Invention Needed: Just had a corticosteroid spina...

The Milwaukee and Wisconsin News: Invention Needed: Just had a corticosteroid spina...: Just had a corticosteroid spinal injection today 07 18 2012 They did not need to sedate me and it was not painful.  This shot reduces inf...

The Milwaukee and Wisconsin News: Two Inventions Needed 07 14 2012

The Milwaukee and Wisconsin News: Two Inventions Needed 07 14 2012: 1.  A masking tape that has a scale pattern cut out of it.  Background:  many people like to make their own fishing lures.  The hard part i...

Inventions Needed Spring activated telescoping boat push pole

Inventions Needed Spring activated telescoping boat push pole 07 12 2012

How many times have you found yourself on a sand bar or in shallow water all too quickly. 
Push poles are very inconvenient to store in your boat because they are often as long as the boat is.

What would be great is if you had a telescoping push pole that "telescoped" to about 12 feet long with the push of a button that activated a series of spring latches.

You drift up on a sand bar and quick grab the push pole, extend it and push yourself off the sand bar or through a shallow channel- as it were.

If not handled properly it could be dangerous.  So it would never be marketed- but I would want one. 

It would be kind of like the Gun and motorcycle helmet type liability.  It wasn't the manufacturers fault the user did not exercise extreme care.

Copyright 2012 Thomas Paul Murphy

Originally published on 07 12 2012 at:     http://inventionsneeded.blogspot.com/

The Milwaukee and Wisconsin News: Inventions Needed a waterproof body bag for trophy...

The Milwaukee and Wisconsin News: Inventions Needed a waterproof body bag for trophy...: Inventions Needed a waterproof body bag for trophy fish. It has to be at least 7 feet long and safe to hold ice. Background: it is very...

The Milwaukee and Wisconsin News: Inventions Needed Beach Blanket

The Milwaukee and Wisconsin News: Inventions Needed Beach Blanket: Inventions Needed Beach Blanket with weighted corners Have you ever gone to the beach and had the wind blow the corners of your beac...

The Milwaukee and Wisconsin News: All Bath Tubs should be 7 feet long it should be t...

The Milwaukee and Wisconsin News: All Bath Tubs should be 7 feet long it should be t...: All Bath Tubs should be 7 feet long it should be the new plumbing code. This is definitely an evil woman plot and why they do indeed live...

The Milwaukee and Wisconsin News: Inventions Needed Exterior counter rifled gun barr...

The Milwaukee and Wisconsin News: Inventions Needed Exterior counter rifled gun barr...: Inventions Needed: Exterior counter rifled gun barrels. Background:   The trend in firearms today both military issue and hunting is ...

The Milwaukee and Wisconsin News: Inventions Needed Trailer train solar cell trailer...

The Milwaukee and Wisconsin News: Inventions Needed Trailer train solar cell trailer...: Inventions Needed Trailer train solar cell trailers 03 29 2012 I got to thinking as I was buying new running shoes because I lost one.  I ...

The Milwaukee and Wisconsin News: Invention needed standardized captive shop vacuum ...

The Milwaukee and Wisconsin News: Invention needed standardized captive shop vacuum ...: Inventions Needed 04 19 2012 :  Standardized shop vacuum hose connections that are rubber or of spring rubber gasket construction. © ...

The Milwaukee and Wisconsin News: Inventions Needed Laser targeting ant killing trap...

The Milwaukee and Wisconsin News: Inventions Needed Laser targeting ant killing trap...: Inventions Needed: Laser targeting ant killing trap with video recording This one would look like a little carousel or glass funhouse.  I...

The Milwaukee and Wisconsin News: Inventions Needed Solar electric power based purif...

The Milwaukee and Wisconsin News: Inventions Needed Solar electric power based purif...: Inventions Needed 04 19 2012C:   Solar electric power based purification of rainwater systems. © 2012 Thomas Paul Murphy Full te...

The Milwaukee and Wisconsin News: Inventions Needed Automobile safety belts that spo...

The Milwaukee and Wisconsin News: Inventions Needed Automobile safety belts that spo...: Inventions Needed: Automobile safety belts that spool out under friction 04 28 2012 Crash test dummy tests should be conducted to determi...

The Milwaukee and Wisconsin News: Two Inventions Needed 05 03 2012

The Milwaukee and Wisconsin News: Two Inventions Needed 05 03 2012: Two Inventions Needed 05 03 2012 1.          Cam action refrigerator door hinges.   These would allow you to not have to adjust the ...

The Milwaukee and Wisconsin News: Inventions Needed Rifle scope with a range finder ...

The Milwaukee and Wisconsin News: Inventions Needed Rifle scope with a range finder ...: Wouldn't it be nice if a rifle scope had a range finder built into it so that the center "Dot" or other articulating configuration was alwa...

The Milwaukee and Wisconsin News: Inventions Needed Trailer train solar cell trailer...

The Milwaukee and Wisconsin News: Inventions Needed Trailer train solar cell trailer...: Inventions Needed Trailer train solar cell trailers 03 29 2012 I got to thinking as I was buying new running shoes because I lost one.  I ...

Inventions Needed: Camera with Digital Tri Level

Modern cameras should have a digital tri-level on the upper right corner of the LCD screen or seperate screen.  A tri-level is one that levels on three axis's.  This would be very beneficial to photographers of all types.

Also a camera could have a digital readout of the distance it is from the center of the lense to the floor.  This would help portrait photographers as they often measure the distance from the ground to the center of a "portrait."

Thomas Paul Murphy

Copyright 2012 Thomas Paul Murphy
Originally published on 03 25 2012 at:  www.inventionsneededblogspot.com

The Milwaukee and Wisconsin News: Inventions Needed: Vibrating Massage Shoes 03 10 2...

The Milwaukee and Wisconsin News: Inventions Needed: Vibrating Massage Shoes 03 10 2...: Inventions Needed: Vibrating Massage Shoes How nice it would be to sit down somewhere after walking a long distance and flip a button and ...

The Milwaukee and Wisconsin News: Inventions Needed: Homeland Security Bullets 03 07...

The Milwaukee and Wisconsin News: Inventions Needed: Homeland Security Bullets 03 07...: Every American should have ammunition for their rifles that can penetrate and take out a invading foreign army helicopter gun ship. Now it...

The Milwaukee and Wisconsin News: Inventions Needed side of car or fender gun rest 0...

The Milwaukee and Wisconsin News: Inventions Needed side of car or fender gun rest 0...: If I were Governor I would repeal the law that say's it is legal to rest a gun on the side of a car. It could only be legal if you had my s...

The Milwaukee and Wisconsin News: Invention Needed Actuated Tie Rod Steering Linkage...

The Milwaukee and Wisconsin News: Invention Needed Actuated Tie Rod Steering Linkage...: Invention Needed Actuated Tie Rod Steering Linkage 02 29 2012 You only need the toe in for turning or initiating a turn. When going str...

If you like my Inventions Needed Website you will also like my Novel

If you like my Inventions Needed Website you will also like my Novel The Voyage of the Cauldron Skipper as it has many inventions and futuristic concepts in it.

You can find it here:You can find it here:The Voyage of the Cauldron Skipper

The Milwaukee and Wisconsin News: Inventions Needed 02 27 2012 C The Tripod Camera S...

The Milwaukee and Wisconsin News: Inventions Needed 02 27 2012 C The Tripod Camera S...: Inventions Needed 02 27 2012 C The Tripod Camera Strap Carrying a tripod is an iffy type of ordeal, as in I don’t know IF I will need to ...

The Milwaukee and Wisconsin News: Inventions Needed water bottle steamer 02 27 2012 ...

The Milwaukee and Wisconsin News: Inventions Needed water bottle steamer 02 27 2012 ...: Water Bottle Steamer Background: Water bottles that are reused are quite popular. The problem arises in that they can not be effectivel...

The Milwaukee and Wisconsin News: Inventions Needed 02 27 2012 Conventional Oven wit...

The Milwaukee and Wisconsin News: Inventions Needed 02 27 2012 Conventional Oven wit...: Inventions Needed: 02 27 2012 Conventional Oven with Adjustable Chamber Hole ~An oven that changes the size of the opening depending o...

The Milwaukee and Wisconsin News: Inventions Needed A pencil eraser to put in the en...

The Milwaukee and Wisconsin News: Inventions Needed A pencil eraser to put in the en...: Background: When making biscuit type joints in wood it is imperative that one make corresponding pencil marks on each piece of wood to be ...

The Milwaukee and Wisconsin News: Inventions Needed The Frictionless Magnetic Clutc...

The Milwaukee and Wisconsin News: Inventions Needed The Frictionless Magnetic Clutc...: Inventions Needed The Frictionless Magnetic Clutch Transmission With the advent of electric cars we are going to need transmissions that ...

The Milwaukee and Wisconsin News: Inventions Needed A red wine syrup sauce for steak...

The Milwaukee and Wisconsin News: Inventions Needed A red wine syrup sauce for steak...: Invention needed: a sulphite free red wine type syrup sauce for steaks. Not very sugary, but very concentrated. Thomas Paul Murphy Copyr...

The Milwaukee and Wisconsin News: A Spotting Scope with LCD screen to use at the ran...

The Milwaukee and Wisconsin News: A Spotting Scope with LCD screen to use at the ran...: Inventions Needed: A Spotting Scope with LCD screen to use at the range. Most rifle and pistol range do not have a way to check your down ...

The Milwaukee and Wisconsin News: Inventions Needed A Rimfire 22 with four firing pi...

The Milwaukee and Wisconsin News: Inventions Needed A Rimfire 22 with four firing pi...: Invention needed a rim fire .22 hand gun with four firing pins. Three located at 120 degrees apart and one in the center where they say the...

The Milwaukee and Wisconsin News: Inventions Needed Law Enforcement 01 31 2012

The Milwaukee and Wisconsin News: Inventions Needed Law Enforcement 01 31 2012: Inventions Needed 01 31 2012 Law Enforcement 1. A Video Badge that is a video camera and sound recorder. Officer’s actions ...

The Milwaukee and Wisconsin News: Inventions Needed A dry suit that is made out of n...

The Milwaukee and Wisconsin News: Inventions Needed A dry suit that is made out of n...: Inventions Needed: A dry suit that is made out of Nitrile 01 13 2012 What people are going to need in the near future when they go on group...

The Milwaukee and Wisconsin News: Inventions Needed 01 02 2011

The Milwaukee and Wisconsin News: Inventions Needed 01 02 2011: Invention needed 01 02 2011 A gloss paint whereby the gloss rises to the surface when drying and creates a smudge proof layer. The p...

The Milwaukee and Wisconsin News: Two New automotive laws that should be proposed an...

The Milwaukee and Wisconsin News: Two New automotive laws that should be proposed an...: New automotive laws that should be proposed and go into effect. 1. All new tires on cars should be stamped with contrasting 1” ‘l...

Socks with Rubber Spots 11 28 2011

The American worker is on his/her feet all day.  What would really help those who are on their feet all day would be if a company marketed socks that had rubber spots or dots on the bottom of them.

The rubber dots should be about 1/4 inch in diameter and a little raised.  They would greatly help alleviate tired feet. 

The reason they are needed is because new shoes do not last very long for the American worker who is on his/her feet all day.

Some companies do make the treaded socks for people who just wear socks and don't want to slip but what I am talking about is a sock that has rubber dots on the bottom.

Thomas Paul Murphy
Copyright 2011 Thomas Paul Murphy

Originally published on 12 05 2011 at: www.inventionsneeded.blogspot.com

Invention Needed: Automotive Intake Air Preheat 05 02 2011

Invention Needed: Automotive Intake Air Preheat 05 02 2011


Air entering the combustion chamber should be preheated.


Background cold air causes fuel to condense. Combustion of condensed fuel is not as efficient and is indeed more polluting as more carbon monoxide is released as well as other byproducts of incomplete combustion.


How do we efficiently heat air before entering the combustion chamber and mixing with gas? It is very simple; air taken into the combustion chamber can be heated by passing it through a heat sink integral to the cars exhaust manifolds. The process will have to be computer controlled because it is a new concept. A heat sink is often a grid of strips of thin metal that dissipates heat, some form of this could also look like the grid from your engines radiator. Now there is another novel idea, an initial form of this engine could be where the air intake was located behind the radiator, however radiators would have to be built differently and guaranteed not to leak or at least censor monitored for moisture leakage. But my idea is more utilizing the rising nature of heat by creating a heat sink on the top of the engine much like an upper layer of cake that would be raised strips of thin metal. Cylinder configuration would have to be a little different to accommodate for this but that is something any 101 level engineering student could figure out. When inventing new things today you have to ask yourself what were the limitations regarding creative concepts that prior engineers faced that have been surmounted today with technology and innovation. What hurdles have we already leapt over that original engineers discarded innovation because they were limitations? What limitations no longer exist with regards to efficiency? There are many, and you wonder where all of our R&D money has been spent.


One danger that would need to be mitigated would be the heated intake air combusting the gas before spark and pre-firing. But the system should be devised where by the air can be chamber pre combustion chamber and injected into the cylinder. This would prevent backfiring of combustion into intake.


An engine such as this would be highly efficient because the heated air would indeed expand the gasoline gas and thereby less would be needed to produce the same combustion. In fact the system would become so efficient that oxygen could be electrolysed from water and the car could run on water.


Computer controls would be paramount in that initially the exhaust manifold is not very hot. Any motor that can figure out a way to utilize heat build, effectively a wasted energy, is a more efficient motor.


Solar panels on hood and roof surfaces would make cars extremely more efficient.


The technology exists today for a car to get 200mpg with the same horsepower and speed that they do today.


A heat sink rising from an exhaust manifold array could be located on the top of the engine or to the side in the case of V orientated cylinder.


Key factors that need to be considered are how hot is it likely to get and what are the combustion dynamics that need to be regulated regarding that.


One more point, an engine such as this would require less need to be cooled down because it is more efficient and the engine is cooled as air is brought into the intake. So the motor would need to spend less energy driving a water pump, that energy can be utilized to produce forward motion. This engine would be extremely efficient on drives more than ten minutes in length as the manifold heats up more. Also this would make cars in the colder northern regions more efficient during the winter.


Indeed such an engine could become so efficient that less spark would be needed for combustion, the need to generate less spark means less energy of the system is needed to produce such spark and therefore the motor is more fuel efficient. Fuel efficiency means one thing, how far can you go per the same gallon of gas.


I know what your critique is already, that you have the makings of your basic bomb with this; all automobile engines are the makings of the basic bomb. And in today’s age of computer controlled engines this is highly possible.






I may not be able to make money from my ideas in this country but I can sure give proof of when I thought of them. And because they are not in commercial production it is likely that I am the first to think of such things. This idea is not for profit this idea is meant to help the country. I do not claim to be the initial inventor of this idea although these are my original thoughts. And I would not doubt that our patent office backdates inventions in the guiltless and irresponsible name of corporate America. All that money will have done you no good when the planet no longer supports life because of you.  And when you can not be proud of your actions you will have developed a conscience, and it is a conscience that governs humanity not greed.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy


Originally published on 05 02 2011 at: www.inventionsneeded.blogspot.com

Inventions Needed: Treadmill Design Improvements 04 19 2011

Inventions Needed: Treadmill Design Improvements 04 19 2011

Whenever I get on a treadmill at a gym I don’t have enough to do. They need to make a treadmill that has a speed bag mounted on a platform to the front of the treadmill so that I can use my arms while I am running and develop coordination to hit the speedbag while running. They could even make one whereby the speedbag platform moves around a little bit.


Also the treadmill could have footprints painted on the conveyor belt so that I could develop more coordination by hitting those steps with my feet. At the very least a grid pattern could be printed on the conveyor belt in about 12”X 5” rectangles, to add a little variety to the exercise.


And lastly I do not like to watch the television when I run I just end up looking at the clock. The clock on the treadmill therefore needs to be placed at eyelevel and not lower than eye level as it is today.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy






Originally Published on 04 19 2011 at: www.inventionsneeded.blogspot.com


I may not be able to get all my inventions patented but I can show to you and prove who thought of them first! 

Invention: Leg Press Powered Bicycle 04 02 2011

Invention: Leg Press Powered Bicycle 04 02 2011

A bicycle that uses the same type of leg force as a leg press dose at an exercise club. A bicycle such as this could do more than sixty miles per hour.


Current leg energy is wasted by the circular movement of the peddles. This invention transmits the same force that the leg uses in a leg press machine into forward movement per full length of the leg stroke. This is a much stronger force than that of the peddling in a small diameter motion.


The bicycle would have to be recumbent or low to the ground and the wheels would have to be enclosed and vented per fore low and aft high. A refractory mirror could be employed so that the “Cycler” does not have to “crane” his/her neck to ride it, thereby the frame could be made more aerodynamic and low to the ground.


One can transmit a tremendous leg force as is done in the direction of the leg moves in a leg press or squat. If you think about it the average sized man can learn to squat over 200 lbs, because this is how our legs are designed to be used not in the small diameter motion. I don’t know what the record for the squat is but I have seen men leg pressing 12 plates, that is 540 lbs. There is tremendous potential to transform such force into forward momentum. Could speeds of 200 mph be reached some day? With assist mechanisms of power such as solar panel electric drive motors that is likelihood.


Moving the legs in the full forward stroke is also healthier for the leg muscles.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy


Originally Published on 04 02 2011 at: www.inventionsneeded.blogspot.com

Golf Club Shaft Vibration Damper

Invention 04 02 2011

Golf Club Shaft Vibration Damper


This invention of mine is meant to decrease the shock to the wrists and hands from the force created when the club hits the golf ball. In essence it is made of a rubber, polyurethane or similar material that is able to reduce vibration. A collar is made of such material and placed at a point on the club shaft or more than one point. It would be of low profile construction and thereby close to the shaft.


We have all felt that jarring twang when we hit the ball and the club vibrates into our wrists. This can cause or worsen arthritis over time. This invention is designed to reduce the vibration to the hands by such gold ball hits by damping it, in effect absorbing it into the material and thereby dissipating it.


Background:


In it’s simplest form it could be thought of to be a section of discarded golf grip placed along the shaft between the club handle and the grip.






Copyright 2011 Thomas Paul Murphy


Thomas Paul Murphy


Originally Published on 04 02 2011 at: www.inventionsneeded.blogspot.com

Fan for Your Underwear 04 02 2011

Invention Needed:



Fan for Your Underwear 04 02 2011


A silver dollar or coin sized fan that runs on a watch battery and is humidity activated. It has screening to protect you from the fan blades. And would fit in slots in your underwear. This invention would eliminate the moisture in your crotch that is the breeding ground for fungus and germs.


Of course you would have to have to learn and maintain habits regarding cleanliness for this area to start.


Our modern clothing is not ventilated in this area for those of us who are active. And contrary to what most people believe you can catch sickness from sitting in a chair were somebody’s germy butt sat. Your dirty butt is full of germs such as E-coli, etc. If you ever talk to someone and their breath smells like a toilet they have a Candida infection whereby they have not been active and do not have a health gastrointestinal tract. What this means is that germs that are meant to populate their lower intestinal track have populated their whole bodies. These types of people are usually in a fog of stupidity. If you talk to them and get a good whiff of this you are likely to get sick because your upper respiratory tract has not been accustomed to the germs that have broken through the resistance of theirs.


A humidistat would turn the fan on when the area got “moist” (don’t know what this would say about women) and dry the area to prevent the formation of fungus and the growth of other bacteria and germs that thrive in this warm moist environment. It would also stop the spread of hemorrhoids which are indeed a germ infection much like the gastric ulcer was found to be.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy






Originally published on 04 02 2011 at: www.inventionsneeded.blogspot.com

Automotive Invention to reduce the air friction drag created by tire treads 04 02 2011

Automotive Invention to reduce the air friction drag created by tire treads 04 02 2011


-Fore low and aft high vented wheel wells to direction of motion.






Wheel wells vented in this dynamic would reduce drag on the wheel caused by a chambered air in the wheel well that causes drag. This invention would reduce drag as the treads would indeed be more in harmony with the minute air friction created by the tire treads. If vents in the hood were located in front of the wheels and one vented to the lower front of the wheel and the other to the upper back of the wheel a paddlewheel of air force that increases with speed would reduce the non-dynamic friction of air created by the tire treads in effect having to paddlewheel air forward, this is drag against the direction of rotation.


Better mileage would be created if the wheels were vented in such manner. And there is plenty of space inside the fenders to do this.


A similar dynamic could be created with the real wheel wells.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy






Originally published on 04 02 2011 at: www.inventionsneeded.blogspot.com

Combination Pressure Washer and Vacuum Quick Car Washer 03 27 2011

Invention


Combination Pressure Washer and Vacuum Quick Car Washer 03 27 2011






The beautiful thing about this car washer is that it is quick and easy to use. A flexible dual hose system is incorporated with it. The top slat of the car wash head, that is shaped like and elongated rectangle, sprays out soapy water with just enough soap to loosen common dirt. There is a brush that runs around the perimeter of the head and across the inner length that separates the water spray function from the water vacuum function. The bottom slot of the washer head is a vacuum head much like your shop vacuum.


Very little water is spilled on your sleeves or slops around. It can be used in cold weather better than one could wash with a bucket of water and a towel because the cleaning water is vacuumed up after it has cleaned. It works much like a carpet cleaning vacuum accept the spray water is of a higher pressure.


One could simply fill the spray reservoir with mild soapy water, plug the machine in and spray vacuum your car clean.


The brush would be of soft long bristles.


There would be less ice buildup on your garage or driveway in winter as most of the water would be vacuumed up and your car would be less likely to have frozen doors or windows as the warm water is vacuumed up.






Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy


Originally published on 03 27 2011at: http://www.inventionsneeded.blogspost.com/


If the country were different I would try and patent this, but that is just living in the “U.S.A.” our ideas are taken by HEIR GOON and we are given mercy in return.

The cure for sebaceous cancer tumors

The cure for sebaceous cancer tumors?


The nature of my invention stems from reading the January 19th issue of Investor’s Business Daily entitled,


“Magnets used to attract medicine”


Time-release pills aren’t always effective because they drug doesn’t release at the optimal spot for absorption in the digestive track. Researchers at Brown University have developed a magnetic pill system they say can safely hold a pill in place while the medicine is released in the stomach. The scientists said in the journal Proceedings of the National Academy of Sciences that they’ve used the procedure without harm on rats. It may one day be used to treat cancer and diabetes in humans.”






How hard would it be combine a chelated form of iron with a anticancer agent? Taxol the expensive anticancer drug was derived from the Pacific Yew tree, an evergreen. Pycnogenol is a readily available over the counter pine park extract.


Can I envision a future whereby one could take a chelated form of iron and combine it with something like pycnogenol. Use some household method such as heat to combine the two into a new molecule. And then if I wanted to take it a step further magnetize it by exposing it to the hollow cylinder of an electric magnet coil?


The method could then be used to treat cancers close to the skin surface. Where by a powerful magnet could be held to the skin surface much like a band aid.


The magnetic compound taken internally would be attracted to this magnetic field and therefore concentrate in the area of the tumor.


Walla a cheap and effective way to treat cancer tumors.


The problem with chemotherapy drugs today is that they affect more cells than the cancer cells because they have to be given in a dose high enough to kill the cancer. In other words they have a broad spectrum toxic effect on all of the cells of the body. This is one novel way to overcome this broad toxicity as a lower dose could be used and it would eventually become concentrated at the site of the cancer where the magnet is placed.


In the case of a deeper tumor arteries that led to the tumor could be targeted with the magnet as a way to direct flow of the iron based compound. What could be achieved here would be the watershed method whereby once the magnet is released the medicine concentrate flows to the area of cancer.


The strength of the magnetic field needed to target lung cancers at the depth below the skin surface could also be measured and a lung cancer patient could where the magnets under his shirt. (We would be far better off banning tobacco smoke though.)


Once the scans have been made at the doctors office the optimal placement place of the magnet could be marked with a pen with strong ink.


Could something of this nature be mixed up in the kitchen sink and household magnets used? Stay tuned, you might buy it from your pharmacist in a drink mix much like a lemonade powder packet, whereby you just add water.










Thomas Paul Murphy


Copyright 2011 Thomas Paul Murphy




Originally published at: http://inventionsneeded.blogspot.com/

All Microwave Ovens should have a smoke detector and alarm built into them 11 28 2010

All Microwave Ovens should have a smoke detector and alarm built into them.

This would prevent many fires when the wrong settings are used.

Basically food you cook in a microwave should and will never smoke unless it is one fire.

The smoke detector can be made to either trigger the alarm, or turn the machine off or both.

I have accidentally used the wrong setting three times and so has just about everyone that I know of.

This could save many lives.  It could save a lot of damage to property etc.

President Obama allocate this to the write department and made it so.


Thomas Paul Murphy

Copyright 2010  Thomas Paul Murphy

Originally Published on 11 28 2010 at:


http://inventionsneeded.blogspot.com/

All Public Urinals could scan a mans urine for disease

All public urinals could be made to have scanner or sensor technology such as infraspectrometers sp?,  to scan the cascade of a mans urine to diagnose disease.

Sensor and microchips have become so cheap that I foresee that this could easily be a feasible action.

You could also put them in bars and if a person has had too much to drink it would tell them.

There are many applications to this.

If we can scan and see the naked bodies of people in airports today, why can't we scan just the urine for diseases, and things that should not be there.  This could indeed lead to the prevention of pandemic diseases in the future.

This would greatly increase the health of the American Population.

I don't know what you would do about womens health regarding this.  And also I don't know what we will do when the clean water flowing down the urinal shows disease is already present.

I am going to forward this one to FEMA, the Federal Emergency Management Association.

We could also screen everyone entering the country for narcotics in this manner.  Unless of course you are of the mindset that we need more of those people here.


Thomas Paul Murphy
Copyright 2010 Thomas Paul Murphy

Originally published on 11 26 2010 at:

http://inventionsneeded.blogspot.com/

All cars in the united states should be painted white underneath the seats,

All cars in the united states should be painted white underneath the seats, so that you can easily find things when they fall under there. Like your driving glasses, money for the toll booth or parking meter, garage door opener, credit cards, keys etc....



Mandate this whoever is in charge of this country!!!!!!!

Thomas Paul Murphy

Copyright 2010 Thomas Paul Murphy

Tin foil that absorbs cooking oil 10 31 2010

This would be a great invention to benefit the health of the average American.  Tin foil/ Aluminum foil that you could line your oven pans with as I do now for items like frozen foods cooked in the oven that are greasy like fried chicken that you bake or french fries that you bake.

It would also be good to set foods on that you removed from the frying pan that are greasy too.

This product might have three layers, the top being perforated in some way, the middle layer being some type of absorbent like a clay based product and the lower layer being captive and leak proof.

In quick summary the food you cooked this way would be less greasy and more healthy.

Thomas Paul Murphy
Copyright 2010 Thomas Paul Murphy

Originally published 10 31 2010 at:
http://inventionsneeded.blogspot.com/

Glow in the dark electrical tape

Not much too say here accept that I would like some.

Glow in the dark electrical tape, why not?

Thomas Paul Murphy

Copyright 2010 Thomas Paul Murphy

http://inventionsneeded.blogspot.com/

Subway Air Vent Electric Producing Turbines 09 17 2010

Okay, why not do it?

Have vents into the street surface that contain turbines the blades of which are the diameter of the vent pipe.

When a subway train went by the vacuum and equalization pressure for and aft would turn the turbines.  Of course they would have to be well maintaned and the distance between placements optimized.  They would not even have to go all the way to the surface, in subways a horizontal shaft could be on top and parraleel with the train shaft.  This would produce the same effect.

We need to think of more ways to produce electricity from the byproduct forces of our activities.

Thomas Paul Murphy

God Bless Those Who Think Of Better Futures

Originally Published on 09 17 2010 at:  http://inventionsneeded.blogspot.com/

Copyright 2010 Thomas Paul Murphy

Transparent Cap Roof Vent Replacement Caps and Retrofits

09 12 2010 4:00 PM Invention Needed: Transparent Cap Roof Vent Replacement Caps and Retrofits



Invention, roof cap vents or retrofit kits made from the same material as domed sky lights.


This material can withstand the elements and has been proven in skylights


There could also be a retrofit cap that could be easily pop riveted to the collar of a standard cap vent.


This retrofit would provide illumination to dark garages and attics with little additional cost as roofs have vent caps already. An optimal time to replace these would be when roof shingles are replaced, but in reality if there is an existing hole through the roof where there is a cap vent already they could be easily replaced at any time.


As far as I know this is my idea and design. I am divulging it to the public because the patent system and rights to intellectual property have been corrupted.


I do not claim any right to this and have not searched this out. I do know that a great market potential exist for these that has not been addressed, and would save this country energy.


There will never be the spirit of invention in this country the way it was in our countries history ever again. The spirit of invention that built this country is now stolen. The small inventor with the best ideas does not have a chance anymore, as he did in the history of this country.


The true inventors of things never get credit or remuneration in this country anymore. What do they get demonized, labeled as crazy and put on medicine so their ideas can be shamelessly stolen, by of all people Satan. Don’t laugh because it is true.


The more intelligent in this country are demonized by Religious orders, and their ideas feed the mouths of the brazen women of the time of Rome. This is why the Arab world hates us and quite frankly I and the one percent of our population who suffer shamelessly at their hands do not like it either, we loath it.


The patent system in this country has been subverted to the will of university research and corporate monopoly. The crime lords and Universities use nonlethal technologies to drive these people “Crazy” and discredit them. This allows them to steal without threat of culpability.


They use nonlethal weapons to torture those of greater intellect and loot their minds under the protective guise of organized religion and psychiatry to maintain a false status Quo in this country. And yes Wall Street is part of this too, and they do not have our best interests at heart, only their own bank accounts. They care little for Democracy.


So go ahead take this and claim it as your own, you have done so with most of my intellectual property for the last forty years.


God Bless Those Who Think For Themselves




Thomas Paul Murphy


Copyright 2010 Thomas Paul Murphy

Originally published 09 12 2010 at:http://inventionsneeded.blogspot.com/

The Cure for all Viruses and Bacteria: Superheated Blood 09 08 2010

Invention Needed:

The Cure for all Viruses and Bacteria: Superheated Blood 09 08 2010


What I have envisioned is a device similar to a dialysis machine, but instead of or in addition to filtering your blood, it heats it up to the temperature of a very high fever, when it goes through the machine. The length of time exposed to heat can be controlled and the blood can indeed be cooled before it is reintroduced to the person via catheter. Cycle times could be controlled for optimization. Viruses and bacteria could be cured in this manner. The flue could be extinguished. There would never be another plague. Future generations of the device could be worn on the forearm. Portable units could be attached by those at risk in remote operations. A vein puncture at the bend of the elbow and one at the other end of the machine in the future at the wrist would be all that is needed.

Background: It is known that a fever cures many illnesses as it raises the temperature to where the germs cannot survive.

Copyright 2010 Thomas Paul Murphy

Originally published at:  http://inventionsneeded.blogspot.com/  on 09 08 2010

This one could be the cure for aids.  But I do know if I really want to cure that.  See my articles on my religion blog and crime against humanity blog for the reasons why.

Invention Needed: Landfill Catalyst

This one is on the lighter side:

Invention Needed: Catalyst to turn an entire landfill into new paving material for roads.

I bet if you took the entire contents of a landfill, put it in a vat of stirring water and added a hardening catalyst and other catalysts that you would have the perfect material for paving a new road that would virtually last forever.  The material would need to be ground to a uniformity and in the same manner that it took Edison thousands of tries to find the appropriate filament for a light bulb, that you could find the appropriate catalysts to convert entropic landfill material into something useable such as material for paving a road.

The consistency of this material would most likely be that of dried oatmeal on a pan I think as I eat my morning barley.  It would need to be sealed at the microcellular level or there would also need to be a catalyst to purge and destroy cellular walls, thereby eliminating a water retention issue.

WHAT DO YOU THINK ABOUT WHEN YOU EAT YOUR BREAKFEST ANYWAY??????

J

God Bless Those With Big Dreams

Thomas Paul Murphy

 Copyright 2010 Thomas Paul Murphy

Originally published on 08 17 2010 at :  http://inventionsneeded.blogspot.com/